Home | English Spanish German
Phone Number
Automated Optical Registration
Automated Optical Registration Die Cutter System

Advanced Flat Bed Die Cutting Systems

Automated die cutting presses are four post hydraulic presses equipped with microprocessor controls. The presses are available with multi-axes cut to print registration with tolerances as close as ±.0005". These systems process material in both sheet and roll form and operate with steel rule dies, male/female dies, or combination tools to blank parts or kiss-cut materials.

2nd Test
Camera Machine
2nd Test
Patented Floating
2nd Test
Additional accessories

The basic features/benefits which distinguish Preco presses in both small job shop shops with short runs to major companies with very large production lots are:

Hydraulically Operated
Cutting pressure is adjustable and is available at any point in the ram stroke. The cutting stroke length is adjustable to increase the press speed.
Four Post Press Design
Assures platen parallelism. Eliminates the frame flex that is experienced with C-frame or OBI presses, therefore increasing the tooling life. The four post press also allows for most types of flat bed tooling.
Modular Accessories
A variety of accessories are available to automate and customize the system to suit a variety of converting requirements. Most accessories may be added at a later date as needed.
Precision Roll
Feed Units
Roll feeds provide automated material processing and increased material yields through closer part spacing. Also provides for safer material processing because the operators do not place their hands in the platen area.
Micrometer Stop
Accurate cutting depth control increases die life and enables trouble free kiss cutting.
Microprocessor Control
Job storage for quick job set up. Controls can be customized for unique applications.
Knock Out Table
Automatically strips parts from the waste web.
Cut to Print Registration Systems
Various registration systems are available utilizing fiber optic and CCD machine vision systems for accurate cut to print applications. Registration system for one (X), two (X-Y) or three (X-Y-Theta) axes are available in a variety of accuracy levels.
Quick Change
Die Clamps
Steel rule dies are mounted with pneumatic clamps to reduce set up time.
Custom Solutions
Requirements not satisfied by standard press and accessories can be designed to suit your application.

Line Break Contact Preco
  • Electronics
  • Graphic Overlays
  • Magnets
  • Flex Circuits
  • Bio-Sensors
  • RFID
  • Membrane Switches
  • Polyesters
  • Polyimide
  • Polycarbonate
  • Polypropylene
  • PVC
  • PMMA
  • Thin metal foils or foil laminates
  • PSA materials
  • Paper stock
  • Gasket materials
  • Most flexible materials
Product Literature

Automated Optical Registration
Product Literature Icon Download PDF

Spec Sheet
Product Literature Icon Download PDF

© Copyright 1997-2018 Preco, Inc. All rights reserved | Disclaimer
Made in the USA