RCP Rotary Converting Platform

Models RCP 3-6, RCP 5-10, RCP 7-14
Medical Rotary Converting Platform (RCP) Die Cutter Machine

Intelligently Designed Machines

Whether you are a contract converter requiring a fast set-up, flexible configuration system, or a manufacturer requiring an engineered solution for your specific rotary converting needs, Preco has a solution. Preco can guide you to the correct configuration by offering the models below. These models have the quickest build times (many stocked components), mechanical and software inspection reports to guaranteeing quality, and qualified installation service once the machine is installed in your plant.

Our equipment is CE compliant and certified along with a clean room adapted for those required. We offer remote access assistance and troubleshooting technical support no matter your location. Preco has been building rotary machines for over a decade with new innovations continually developing.

Maximum flexibility and reliability.

Every Preco RCP machine uses well-organized cabinets for electronics and drives components, which are located as end-caps on the systems. This helps to provide a slim profile for machine placement and ease of serviceability. Spindle motor and reducers via electronic gearing facilitate web and taper influences for precision web tension control. The quick-change modular manifold design allows for maximum setup flexibility using die stations that can be combined or removed for space allocation.

Rotary Converting Platform (RCP) 3 Stations / 6 Spindles

3 Stations / 6 Spindles

This entry-level rotary offers full functionality and auto-registration for various converting processes. Multi-pass processing possible.

EASILY INTEGRATED

  • 1 – 2 Dies (Cutting Tools)
  • Lot Coding
  • Island Placement
  • Laser Processing
Rotary Converting Platform (RCP) 5 Stations / 10 Spindles

5 Stations / 10 Spindles

Our intermediate-level rotary offers full functionality and auto-registration for converting processes. Allowing multiple die cutting, lamination and delamination all in a single or multi-pass configuration.

EASILY INTEGRATED

  • 2 – 3 Dies (Cutting Tools)
  • Lot Coding
  • Island Placement
  • Laser Processing
  • Corona Treating
  • Packaging Cold-Seal
  • Vacuum Conveyor
Rotary Converting Platform (RCP) 7 Stations / 14 Spindles

7 Stations / 14 Spindles

The advanced-level rotary offers full functionality and auto-registration for converting flexibility. Allowing multiple die cutting, lamination and delamination all in a single pass or multi-pass configuration.

EASILY INTEGRATED

  • 3 – 5 Dies (Cutting Tools)
  • Lot Coding
  • Island Placement
  • Vision Inspection
  • Vacuum Conveyor
  • Packaging Cold-Seal
  • Packaging Rotary Heat-Seal
  • Corona Treating
  • Laser Processing
  • Flexo Printing
  • Product Tracking & Rejection

Custom equipment is our standard.

The RCP equipment is designed to modularly integrate sub-supplier equipment and functionality. The rotary unit can be expanded or divided into sub-sections to allow specialized automation to occur within a "step and repeat" or "continuous" motion environment for accurate and repeatable insertion or deposition of such components.

Rotary Converting Platform Custom Equipment Option

Preco will build the exact width machine and type of gearing required for your legacy products to ensure tooling transformation from obsolete equipment into state-of-the-art equipment. Our customized rotary designs are driven by your equipment specification and product drawings from which the overall concept is generated. 3D modeling allows for process and design corrections during the design review phase prior to part/component machining. Debug of your machine takes place on our factory floor until satisfactory results are accomplished.

CAPABILITIES

  • Rotary Die Cutting
  • Rotary Die Kiss-Cutting

Modular Accessories

Add either a Preco-made device from our available options, or construct your own proprietary innovation to create a last-minute, special purpose appliance.

Delivery Conveyor for Rotary Die Cutter

Preco-Built Delivery Conveyor

Rotary Die Cutter Tapped Station Mounts

Tapped Station Mounts

Rotary Die Cutter Window Waste Transfer Device

Window Waste Transfer Device

Rotary Die Cutter Part Transfer System

Part Transfer System

Features of buying a Preco Rotary Converting Platform

The purpose of an idler roller is to change the direction of a web. Preco's backplane system provides idler roller capability almost anywhere on the platform. The tapped and threaded grid wall allows easy roller placement for processing of materials and for greater efficiency.

Preco found that press operators most often run out of available spindles before using up the process stations. Preco maintains an abundance of capacity.

Electrical connection points on the backplane keep wires out of the path of tooling, materials and the light curtain field. Preco's proprietary registration setup needs only the gear tooth and pattern count with a repeating mark on the web—forget homing devices or extra wires!

Long-Medium-Flush articulated idler rollers give the operator full placement control, whether close or away from the die or nip, upon entering or leaving a process station. Threaded holes on the station ensure a parallel path.

The Preco web guide alignment device provides a simple method for managing of incoming material. Three adjustments are used to assure a correct web approach angle and the equal distance of the web between the send and receive points. A fine-tune screw permits a subtle shift of the web in the Y-axis.

Machine access during setup has been made easy. There is no need to step away to the HMI to lock down a material core, as every spindle is within reach. Apart from setup jog mode, machine speed during production can be increased with a simple turn of a knob.

Whether you are a first-time user or an experienced technician, the HMI touch-screen controls of the RCP are logical and understandable. All components can be entered and monitored, along with ongoing trending of registration accuracy and roll material status.

You may attach a Preco-made device, or better still, an appliance that your company has created for a special purpose. The same M6 threaded holes that mount station idlers are perfect for rapid fastening of just about any fixture that is required for that next work order.

Safety is important, but its implementation should not be an obstacle to required process adjustments. Preco provides the simplest, non-invasive solution.

Standard Equipment Sizes

Preco's Rotary Converting Platform standard sizes and weights.

  Small
3 Stations / 6 Spindles 
Medium
5 Stations / 10 Spindles
Large
7 Stations / 14 Spindles 
Footprint Width: 96" (2.4 m) Width: 154" (3.9 m) Width: 178" (4.5 m)
Height: 90" (2.3 m) Height: 90" (2.3 m) Height: 90" (2.3 m)
Depth: 70" (1.8 m) Depth: 70" (1.8 m) Depth: 70" (1.8 m)
Approx. Weight 2 tons (1.8 metric tons) 3.2 tons (2.9 metric tons) 4.5 tons (4.1 metric tons)
Electrical US: 480 V,  Intl: 400 V
60 A / 50-60 Hz / 3P
US: 480 V, Intl: 400 V
100 A / 50-60 Hz / 3P
US: 480 V, Intl: 400 V
150 A / 50-60 Hz / 3P
Pneumatics 90 psi @ 4 SCFM (0.95 bar/min) 90 psi @ 5 SCFM (1.2 bar/min) 90 psi @ 6 SCFM (1.4 bar/min)
  Small
3 Stations / 6 Spindles 
Medium
5 Stations / 10 Spindles
Large
7 Stations / 14 Spindles 
Footprint Width: 170" (4.3 m) Width: 192" (4.9 m) Width: 210" (5.3 m)
Height: 100" (2.5 m) Height: 100" (2.5 m) Height: 100" (2.5 m)
Depth: 77" (2 m) Depth: 77" (2 m) Depth: 77" (2 m)
Approx. Weight 3 tons (2.7 metric tons) 4.8 tons (4.4 metric tons) 6.8 tons (6.1 metric tons)
Electrical US: 480 V,  Intl: 400 V
80 A / 50-60 Hz / 3P
US: 480 V, Intl: 400 V
150 A / 50-60 Hz / 3P
US: 480 V, Intl: 400 V
200 A / 50-60 Hz / 3P
Pneumatics 90 psi @ 5 SCFM (0.95 bar/min) 90 psi @ 8 SCFM (1.2 bar/min) 90 psi @ 8 SCFM (1.4 bar/min)

Tech Specs

Technical parameters are based on a baseline standard but all Preco rotary machines can be customized to meet your product's needs.

Press Speed  0-90 m/min (0-300 in./min)
Standard Web Widths Available 178 mm (7 in.), 255 mm (10 in.), 330 mm (13 in.), 406 mm (16 in.), 508 mm (20 in.), 609 mm (24 in.)
Spindle Servo-Motors:
Tension Control Ranges
Small: 1 – 9 N (0.2 – 2.1 lbf)
Large: 11 – 62.3 N (2.5 – 14 lbf)
X-Large: 20 – 89 N (4.5 – 20 lbf)
XX-Large: 45 – 125 N (10 – 28 lbf)
Manual Y-adjustment of Die Stations ± 19 mm (0.75 in.) travel
Servo Stations  Independently driven and controlled
Gearing  1/8 in. pitch, 20° pressure angle, internal attachment to cylinder MOD1 (3 mm) pitch available 
Automatic Web-Guiding Ultra-sonic sensing guided positional control
Available on any spindle locale, unwind/rewind
0.25 mm (± 0.01 in.)
Standard Max Roll Diameter 508 mm (20 in.) 
Custom diameter available up to 1.5 m (60 in.)
Standard Core Diameters 76 mm (3 in.), 152 mm (6 in.)
RCP Shutdown Mechanisms  Full roll diameter (rewind)
Low roll diameter (unwind)
Part counter
Meterage counter 
Splice detection
Light Curtain Protection  2 m (6.5 in.), Programmable blanking of zones, discreet units per station available
Construction  Welded steel frame with precision-ground, powder-coated Al backplane
Shingling/Batching Conveyors  Laser sensor for counting products: 482 mm (19 in.) range
Lengths: 0.61 m (2 in.), 1.22 m (4 in.), 1.83 m (6 in.), 2.44 m (8 in.), 3.05 m (10 in.), 3.66 m (12in.)

Medical Processing Equipment Line

Have Questions?

Reach out to a Preco sales representative directly to get your project started.

Equipment Sales

paul-johnson-335x419-2.jpg

Paul Johnson

Rotary Product Manager
913.928.2138
Email Paul
burns-luke-335x419.jpg

Luke Burns

Regional Sales Manager
913.928.2144
Email Luke
evans-darren-335x419.jpg

Darren Evans

Regional Sales Manager
913.928.2135
Email Darren
zach-haddock-335x419.jpg

Zach Haddock

Regional Sales Manager
913.928.2225
Email Zach
scarvaci-salvatore-335x419.jpg

Salvatore Scarvaci

European Managing Director
+44 1227 473 900
Email Salvatore
volker-hofmann-335x419-2.jpg

Volker Hofmann

European Sales/Technical Support Manager
+49 6387 993 209
Email Volker

Quick Contact

Required
Required
Required
Required
Required